please feel free to contact us

604-580-3030

Infiltrator® Plastic Leaching Chambers

The Infiltrator® plastic leaching chamber is a gravel-less alternative for on-site septic leach field systems. The design objective is to provide maximum infiltrative surface area while allowing effluent to flow in all directions. This has been achieved by combining the traditional, open bottom with a series of louvers along the sides. The louvers are designed to allow effluent to pass into the backfill while preventing the backfill from migrating into the chamber.


Infiltrator® chambers are constructed of high density polyethylene which is inert to sewage. All Infiltrator® chambers can withstand H-10 loads when installed with properly graded and compacted soils. A minimum of 12" of cover is required for H-10 loads.


The Quick4 Standard Chamber

The Quick4 Standard Chambers have advanced contouring connection that swivel 10 degrees, right or left. Both chambers can support wheel loads of 16,000 lbs./axle with only 12" of cover.


The Quick4 Standard Chamber fits into a 36-inch wide trench. Its MultiPort end cap with eight molded-in inlets/outlets allows multiple piping options and eliminates pipe fittings.


Quick4 Equalizer 24/36

The Quick4 Equalizer 24 and Quick4 Equalizer 36 chambers have advanced contouring connection that swivel 15 degrees, right or left. They can support wheel loads of 16,000 lbs./axle with only 12" of cover.


The Quick4 Equalizer 24 chamber fits into an 18-inch wide trench. Its MultiPort end cap with six molded-in inlets/outlets allows multiple piping options and eliminates pipe fittings.

Chambers Quick4 Standard Quick4 Equalizer
Length 53" 53"
Width 34" 22"
Invert 12" 12"
Created by

Legal notice